Category: Cultivation and Planting Equipment

The Ndume chisel plough is designed to work behind a 30 to 80HP two or four wheel drive tractor. Tines are the easy-flow low draught type. It is designed with a wheel at the rear to;1) depth-control the plough, and 2) eliminate the side draught caused by thefirst tine. This wheel is adjustable for depth and steering.Conventional ploughing requires two tractor wheels in the previous furrow which causes compaction. With...

The Contine Ripper is designed to rip in between rows of coffee, sisal etc. The tine is designed to get under the side of the tree or brush without damaging it. This ensures good moisture penetration to the root system of the plant. The tines are protected by a 5/8” shear bolt system, and tinesare adjustable across beam to accommodate different crop row widths.

Chisel-ploughing the Ndume way means: More Acres cultivated with less fuel.Leaves your moisture from the previous season underground - where it should be.Incorporates crop residue into the topsoil where it should be.Eliminates all pans caused by conventional ploughing.Reduces erosion because moisture can penetrate deep down.Leaves your field in a state that means one harrowing is usually enough for a seed bed.TECHNICAL SPECIFICATIONSThe Main Frame Material• 100mm x 100mm high stress...

Simple heavy duty Ridger wings fitted to tines (the same tine as fitted to Ndume Chisel Ploughs) protected by a 5/8” Shear Bolt system.Tines are adjustable across beam to accommodate different sized seed beds.Ridger wings are detachable, therefore easily replaced if damaged.