• Easy to calibrate
• Simple to maintain
• Easy to use
• Designed to seed even in the
most extreme conditions
• Direct-Drill or seed
conventionally

The simplest Seeder ever made!
The NdumeAir Seeder has none of the complex parts normally associated with
conventional seed drills e.g. no gears, no clutches, no discs or springs. The
conventional 16 run seeder has 16 separate metering units for sowing seed and 16
units for sowing fertilizer. The Ndume Air Seeder has one metering unit for seed and
one for fertilizer. Both metering units are the fluted roller type made of steel and run
on sealed ball bearings. Seed and fertilizer distribution is done by air through one
distributor head – there are NO MOVING PARTS TO GO WRONG. Air for the system is
provided by a fan driven by the tractor P.T.O. shaft.
A choice of tines is now available on all models of Ndume Air Seeders. Easy-Flow spring
tines for conventional seeding operations, and our new Direct Drill tines which can be
used for Conventional, Minimum Till and Zero Till planting. Row spacing is 10”
The Spiral Roller at the rear of the machine has two functions:

  1. It covers the seed and firms up the soil.
  2. It depth-controls the machine.
    Drive to the metering units is via the cage wheel shown on the side of the machine.
    When you lift the machine out of the ground drive to the metering units stops. There
    are no clutches or gearboxes.

OPTIONAL EXTRA:
Seeders can be
supplied with
Presswheels
instead of the
Spiral Roller as
shown.

SPECIFICATIONS
Working Width 10ft 9ft
Transport Width 10ft 9ft
No. of Tines 12 10
Row Spacing 10” 10”
Under Beam Clearance 17” 17”
Hopper Capacity – Wheat 200kg 200kg
Hopper Capacity – Fertilizer 200kg 200kg
Power Required 80-90HP 70-80HP