Category: Trailers and Bowsers

The Ndume 2.5 ton trailer is built to last. It has a heavy duty chassis made from 5 x 2.5 x ¼ (all inches) channel with a load spreader plate on the chassis to distribute axle load over a length of 2 feet. The draw bar is welded into a heavy duty box section cross member andhas a hardened steel bush in the hitch. All 2.5 ton trailers are fitted...

Water Bowser 1000 Gallon Water Bowser 500 Gallon

Robust, versatile General Purpose 7-8 ton tipping Farm Trailer. All steel trailer body. Chassis is made from heavy rolled channel. Floor is folded steel construction laid across chassis and welded for maximum strength. Sides are fixed 18” high. Tailboard hinged and easily removed. Drawbar is angled for greater strength and lasting life. Brakes are cam-operated by rod to hand wheel. Dimensions: 12ft long x 8ft wide x 18” high.Tyres: 900...

Robust, most versatile General Purpose 8-ton tipping Farm Trailer. All steel trailer body. Chassis is made from heavy rolled channel. Floor is folded steel construction laid across chassis and welded for maximum strength. Sides are fixed 3-1/2 Feet high. Tailboard hinged and easily removed. Drawbar is angled for greater strength and lasting life. Dimensions: 13ft long x 8ft wide x 3-1/2ft high.Tyres: 900 x 20 x 12 ply. Wheels 8-stud....

Robust, versatile General Purpose 7-8 ton Non tipping Farm Trailer.All steel trailer body. Chassis is made from heavy rolled channel.Floor is folded steel construction laid across chassis and welded for maximum strength. Sides are fixed 18” high. Tailboard hinged and easily removed. Drawbar is angled for greater strength and lasting life. Brakes are cam-operated by rod to hand wheel. Dimensions: 13ft long x 8ft wide x 18” high.Tyres: 900 x...

The Ndume trailer is built to last. It has a heavy duty chassis made of150mm x 75mm x 6mm Channel with a load spreader plate on the chassis todistribute axle load over a length of 1 meter. The draw bar is welded into aheavy duty box section cross member and has an hardened steel bush in the hitch. All 5-tonne trailers are fitted with 7-tonne axles on heavy duty tapered...

A trailer that is ideally matched to a 4x4 vehicle. Built to last in the toughest of conditions. All trailers are supplied with a spare bolt-on Hub. By simply removing four bolts, the damaged hub unit can be replaced quickly and easily - changing a hub is as easy as changing a wheel!! The Ndume-designed draw-bar hitch will accommodate unlimited sideways, and up and down movement. SPECIFICATIONSTyres: 750 x 16...

The Ndume trailer is built to last. It has a heavy duty chassis made of 150mm x 75mm x 6mm Channel with a load spreader plate on the chassis to distribute axle load over a length of 1 meter. The draw bar is welded into a heavy duty box section cross member and has an hardened steel bush in the hitch. All 4-ton trailers are fitted with 6-ton axles on...

The Ndume trailer is built to last. It has a heavy duty chassis made of 150mm x 75mm x 6mm Channel with a load spreader plate on the chassis to distribute axle load over a length of 1 meter. The draw bar is welded into a heavy duty box section cross member and has an hardened steel bush in the hitch. All 4-ton trailers are fitted with 6-ton axles on...

The Ndume 2.5 ton trailer is built to last. It has a heavy duty chassis made from 5 x 2.5 x ¼ (all inches) channel with a load spreader plate on the chassis to distribute axle load over a length of 2 feet. The draw bar is bolted into a heavy duty box section cross member and has a hardened steel bush in the hitch. All 2.5 ton trailers are...