Category: Uncategorized

Minimun Till Chisel Ploughs

CONSERVATION TILLAGE - The Ndume Way Conventional Ploughing Destroys your Soils. It is a well-known fact that conventional ploughing (disc and mouldboard) causes a hard pan and compaction underground. Very shallow depths are usually achieved with conventional ploughing. Generally, disc ploughing will require at least two harrow passes to obtain a suitable seedbed. This leaves the soil very susceptible to wind and water erosion. The more you disturb the soils, the...

Ndume Air Seeders

This document gives a brief description of the three types of Seeders Ndume Ltd offers.All three Ndume Air seeders have none of the complex parts normally associated with conventional seed drills - no gears, no clutches, no discs or springs. A conventional 16-run seeder has 16 separate metering units for sowing seed and 16 units for sowing fertilizer. The Ndume Air Seeder has one metering unit for seed and one...

Harrow Operating Instructions

DISC HARROW OPERATING INSTRUCTIONS Remember if you look after your machine it will look after you! Before using a new disc harrow check all nuts and bolts are tight and that the machine has been properly greased. All moving parts on the harrow linkage without grease nipples should be oiled once a day with old engine oil. Important: After the first day’s work, re-check and tighten all nuts and bolts....
Shredder Operating Instructions

Shredder Operating Instructions

The Ndume Shredder is a simple machine to operate.Once the machine is started all one requires to do is smoothly feed the stems into the hopper. SAFETY NEVER PUSH STEMS INTO THE MACHINE WITH YOUR HANDS AND ARMS BEYOND THE RIM OF THE HOPPER.The shredding mechanism pulls the stems into the knives and cutter bars. To ensure the operator’s hands and arms are not pulled in with the stems. WE...