Category: Milling and Grinding Equipment

The GM15 mill is made to operate with either a 7.5HP electric motor or an engine. There is no base plate, fan or cyclone. The mill is mounted on legs that suspend it approximately 2ft above the floor. A container is placed under the mill, and milled flour drops from the screen straight into the container. Capacity approximately 180Kg per hour depending on size of screen and the moisture content...

The GM50 is a large capacity, robust, durable all-purpose mill capable of dealing with fodder, roughage and grain of all types. It incorporates new as well as well-proven features thus giving more appeal to a greater range of users. The GM50’s capacity will of course vary according to: Size of screen fitted, Driving HP available, Material being milled and Moisture content of the material. Under normal circumstances, the mill will...

The GM40 is a large capacity, robust, durable all-purpose mill capable of dealing with fodder, roughage and grain of all types. It incorporates new as well as well-proven features thus giving more appeal to a greater range of users.The GM40’s capacity will of course vary according to 1) Size of screen fitted, 2) driving HP available, 3) material being milled and 4) moisture content of the material. Under normal circumstances,...

Easy Attachment: Just connect the linkage arms and the PTO shaft. No flat belt and pulley attachment on tractor required. Full Mobility: When necessary, mill can be taken to the foodstuff in the field. No foundation and hold-down bolts required.The Ndume GM40 PTO-driven Hammer Mill is mounted on an all-steel, heavy-duty frame. On the same frame are also mounted the cyclone and the PTO driven shaft and pulley.The frame has...

The Ndume Hammer mills are suitable for all grinding operations maize, wheat, oats, barley, millet, hay, straw and other industrial uses. The GM35 mill is especially suitable for milling of maize• The GM35 is an excellent mill, which makes use of large volumes of air from its very efficient fan.• The additional secondary air inlet ensures clean milling and no overheating.• The GM35 body is made from the very best...

The Ndume Hammer mills are suitable for all grinding operations: maize, wheat, oats, barley, millet, hay, straw and other industrial uses. The GM25 mill is especially suitable for milling of maize.• The GM25 is an excellent mill, which makes use of large volumes of air from its very efficient fan.• The additional secondary air inlet ensures clean milling and no overheating.• The GM25 body is made from the very best...